Directions for Use

Application tool: cloth
Location: interior wood surfaces
Dry time: 10-15 minutes prior to buffing
Cleanup: mineral spirits
Coats: 1 over a previous finish; 2 over raw wood
Recommended uses: furniture, antiques, woodwork, cabinets, doors, paneling and accessories that do not need a hard, protective coat of polyurethane

Minwax® Paste Finishing Wax

Protects and Polishes: WOOD, FLOORS, PANELING, FURNITURE, TRIM

DIRECTIONS

All surfaces must be free from dust, dirt, grease etc. Apply a thin, even coat of Minwax® Paste Finishing Wax with a clean cloth. Allow Minwax® Paste Finishing Wax to dry thoroughly (10-15 minutes) and polish with a clean cloth, weighted buffer or electric polisher. A thin even coat can be conveniently applied by placing a small quantity of Minwax® Paste Finishing Wax in double thickness of cheese cloth and applying only the amount that works through cloth as it is rubbed over surface. THIS MINWAX® PASTE FINISHING WAX PRODUCES A HARD, DRY, OIL-LESS POLISH.

DANGER: KEEP OUT OF REACH OF CHILDREN. Contains mineral spirits. Do not take internally. Avoid contact with skin and eyes. Use with adequate ventilation. Provide a constant flow of fresh air. Keep away from heat, sparks, open flame or other sources of ignition. Close container after each use.

FIRST AID: If swallowed do not induce vomiting.

CALL PHYSICIAN IMMEDIATELY. In case of skin contact wash thoroughly with soap and water. If irritation persists get medical attention. In case of eye contact flush with plenty of water. Get medical attention. If affected by inhalation, remove to fresh air.

Note: DO NOT USE ON RUBBER OR ASPHALT TILE.

SOLVENT: Non-photochemically reactive

DANGER: HARMFUL OR FATAL IF SWALLOWED SKIN IRRITANT COMBUSTIBLE KEEP OUT OF REACH OF CHILDREN.

CAUTION: COMBUSTIBLE MIXTURE, N.Y.F.D.C. of A. No. 1187

Looking For More Information? Windsor Plywood Recommends The Following Links:

Visit The Minwax® Web Site